Virtual eSIM [APN Lookup]

Complete eSIM APN Setup Tutorial

eSIM (virtual SIM card) offers the convenience of instant activation and global coverage. In most cases, eSIM will automatically configure network settings, but if you need to manually set the APN, this guide will assist you in completing the setup.

Advantages of eSIM

Instant activation: Scan the QR code to use immediately, no need to wait for a physical card.
Global Coverage: Supports roaming in multiple countries; one eSIM lets you travel the world.
Flexible data solutions: Select the most suitable solution based on the number of travel days.
Eco-friendly and convenient: No need to replace the physical SIM card, supports switching between multiple eSIMs.

When do I need to configure the eSIM APN?

eSIM usually configures APN settings automatically, but manual configuration may be required in the following situations:

Unable to connect to the network after eSIM installation
It displays "No Service" or "Emergency Calls Only".
Telecom operators require manual input of APN parameters.

eSIM APN Setup Steps

iOS (iPhone) setup instructions:

Go to "Settings" > "Mobile Services"
Choose your eSIM plan
Select "Mobile Data Network"
Enter your APN information in the "Mobile Data" section.
Restart iPhone after saving

Note: iOS systems usually configure the eSIM's APN automatically; the option to manually set it may not be displayed.

Android setup method:

Go to "Settings" > "Network & Internet"
Select "SIM card" or "Mobile network".
Select your eSIM
Select "Access Point Name (APN)"
Click the "+" in the upper right corner to add an APN.
Enter APN information and save.
Select the newly created APN
Restart your phone

Common eSIM APN settings

Set up the project	Common values
APN	Telecom operator designated name
username	Usually left blank
password	Usually left blank
Validation type	none

Important reminder: Please refer to the eSIM activation email or package instructions you received to use the correct APN parameters.

eSIM Enablement Checklist

If your eSIM cannot connect to the network, please check the following in order:

✓ eSIM is correctly installed and enabled.
✓ "Mobile Data" feature is enabled.
✓ Data roaming is enabled (required for travel eSIM)
✓ The correct eSIM has been selected as the data source.
✓ The phone has been restarted.
✓ The area has signal coverage.

Frequently Asked Questions (FAQ)

Q: Can eSIM and physical SIM cards be used simultaneously?

A: Yes! Phones that support dual SIM cards can use both a physical SIM and an eSIM simultaneously. You can specify which card to use for calls and data in the settings.

Q: Does eSIM require data roaming to be enabled?

A: Yes, you must enable data roaming when using a travel eSIM in order to connect to the local telecom operator's network.

Q: Why does my eSIM show "No Service"?

A: Possible reasons include:

eSIM is not enabled or enabled failed.
There is no signal coverage in the area.
Data roaming not enabled
The plan has expired or the data allowance has been exhausted.

Q: Can I uninstall and reinstall eSIM?

A: Most eSIMs can only be installed once, and you may not be able to reinstall them after deleting them. We recommend contacting customer service to confirm before deleting.

Q: Is an eSIM better than a physical SIM card?

A: The advantages of eSIM are instant activation, no waiting for delivery, and support for switching between multiple SIM cards, making it ideal for frequent travelers. Physical SIM cards are suitable for older phones that do not support eSIM.

Need assistance?

If you encounter any problems setting up your eSIM, our after-sales customer service team provides 24/7 support to help you resolve any issues.

Experience the convenience of eSIM now!

Browse our global eSIM plans and enjoy the convenience of instant activation, global coverage, and flexible data plans. No complicated setup required, just scan the QR code to connect to the internet immediately!

Virtual eSIM Card Setup Tutorial

APN lookup

Japan SanTelecom

【Japan】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ To redeem an eSIM QR code on the same day, iOS users 17.4 and above can use the one-click installation ➡️ to enter the redemption code page to redeem ➡️ after redemption, the orange "iPhone Click Here" button will appear to install.

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

5. Follow the on-screen prompts to complete the setup. The eSIM plan tag is manually set; please ensure the correct tag is enabled and that "Mobile Data" is assigned to the eSIM tag installed this time.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Docomo, Softbank, Rakuten Mobile

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[mobile.three.com.hk]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Taiwan (UTC +8)

Date reset 00:00 Taiwan (UTC +8)

[Applicable Region] Japan

Japanese Original Solution IIJ

【Japan's Original Solution IIJ】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose a Japanese telecommunications provider: IIJ Docomo

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "vmobile.jp" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[vmobile.jp]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Japan (UTC +9)/

Date reset 00:00 Taiwan (UTC +8)

[Applicable Region] Japan

Japanese native solution Softbank

[Softbank, a native Japanese solution]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Softbank

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter [APN: plus.4g]

Username: plus

Password: 4g

Authentication Type: CHAP

APN Type: default, ia, mms, supl, hipri / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner and enter the following in the Name and APN fields: 【APN: plus.4g】

Username: plus

Password: 4g

Authentication Type: CHAP

APN Type: default, ia, mms, supl, hipri - Keep and select

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 23:00 Japan (UTC +9)

Date reset 00:00 Taiwan (UTC +8)

[Applicable Region] Japan

Japan KDDI

【Japan KDDI】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: KDDI

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter [APN: au.5g.au-net.ne.jp]

Username: user@au.5g.au-net.ne.jp

Password: au

Identity verification type: CHAP / Username and password are blank and do not need to be entered.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

Username: user@au.5g.au-net.ne.jp

Password: au

Identity verification type: CHAP] / - Keep and select

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

4-day unlimited data plan in Japan, high-speed throughout (hotspot limit 3GB).

5-day unlimited data plan in Japan, high-speed throughout (hotspot limit 4GB).

6-day unlimited data plan in Japan, high-speed throughout (hotspot limit 4GB).

7-day unlimited data plan in Japan, high-speed throughout (hotspot limit 6GB).

8-day unlimited data plan in Japan, high-speed throughout (hotspot limit 7GB).

9-day unlimited data plan in Japan, high-speed throughout (hotspot limit 8GB).

10-day unlimited data plan in Japan, high-speed throughout (hotspot limit 9GB).

15-day unlimited data plan in Japan, high-speed throughout (hotspot limit 14GB).

*You must scan and activate the QR code within 150 days of redeeming it.

00:00 Japan time (UTC+9)

[Applicable Region] Japan

South Korea

【South Korea】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: SKT, LG

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Taiwan (UTC +8)/

Date reset 00:00 Taiwan (UTC +8)

[Applicable Region] South Korea

Mainland China

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ To redeem an eSIM QR code on the same day, iOS 17.4 and above users can use the one-click installation ➡️ to enter the redemption code page to redeem ➡️ After redemption, the orange "iPhone Click Here" button will appear to install.

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: China Unicom, China Mobile, China Telecom

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset 00:00 Taiwan (UTC +8) /

Date reset 00:00 Taiwan (UTC +8)

【Applicable Regions】Mainland China

Hong Kong and Macau

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Hong Kong telecommunications operator: China Telecom HK/HKT

Macau telecommunications operator: China Telecom Macau
(CT Macau)

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "CTExcel" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "【CTExcel】" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Taiwan (UTC +8)/

Date reset 00:00 Taiwan (UTC +8)

【Applicable Regions】Hong Kong, Macau

China, Hong Kong and Macao

[China, Hong Kong and Macau]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Chinese telecom operators: China Unicom

Hong Kong telecommunications operator: CSL

Macau telecommunications operator: CTM

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "mobile") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Tap the "+" in the upper right corner, enter "[mobile]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Taiwan (UTC +8)/

Date reset 00:00 Taiwan (UTC +8)

【Applicable Regions】China, Hong Kong, and Macau

Mongolia

【Mongolia】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an Internet service provider: Unitel

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "internet" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[internet]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*15GB of data for 10 days in the covered area, unlimited local calls and texts in Mongolia.

*You must scan and activate the QR code within 30 days of redeeming it.

Check traffic: *1414#

Check number: *1#

(Date Reset) Mongolian calendar day (UTC+8)

【Applicable Regions】Mongolia

Singapore and Malaysia

[Singapore and Malaysia]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider:

Singaporean telecommunications operators: Simba, Starhub

Malaysian telecommunications operators: Digi, Celcom, U Mobile

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Taiwan (UTC +8)/

Date reset 00:00 Taiwan (UTC +8)

【Applicable Regions】Singapore, Malaysia

New Indonesia

【New Indonesia and Thailand】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider:

Singaporean telecommunications operators: Simba, Starhub

Thai telecommunications operators: AIS, TrueMove

Indonesian telecommunications operators: Telkomsel, XL

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Taiwan (UTC +8)/

Date reset 00:00 Taiwan (UTC +8)

【Applicable Regions】Singapore, Thailand, Indonesia

Singapore, Malaysia, Indonesia, and Thailand

[Singapore, Malaysia, Indonesia, Thailand]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Singaporean telecommunications operators: Simba, Starhub

Malaysian telecommunications operators: Digi, Celcom, U Mobile

Thai telecommunications operators: AIS, TrueMove

Indonesian telecommunications operators: Telkomsel, XL

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Taiwan (UTC +8)/

Date reset 00:00 Taiwan (UTC +8)

【Applicable Regions】Singapore, Malaysia, Thailand, Indonesia

DTAC Thailand Happy Tourist 219

【DTAC Thailand Happy Tourist 219】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: DTAC

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "www.dtac.co.th" / Leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[www.dtac.co.th]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Check traffic usage / Dial for data usage: *101*1*9#

Date reset (Thailand time calendar days)
Thailand time (UTC +7)

[Applicable Regions]

*Redeem QR
The CODE must be scanned and activated within 30 days of being used.

*Note that the installation start time is calculated from the beginning.

*7-day unlimited data plan in Thailand, 15GB high-speed data allowance, speed will be reduced to 1Mbps after exceeding the limit, incoming calls are free.

*Note: Voice and SMS add-on packages are not available for purchase. To restore voice functionality, you must re-authenticate your user identity at a True-dtac store.

*Neither physical SIM cards nor eSIMs in Thailand can be inserted or installed in areas without coverage, otherwise the plan will fail and become unusable.

DTAC Thailand Happy Tourist DTAC

【DTAC Thailand Happy Tourist】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: DTAC

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "www.dtac.co.th" / Leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[www.dtac.co.th]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Check traffic usage / Dial for data usage: *101*1*9#

(Date Reset) Thailand Time (UTC +7)

[Applicable Regions]

*Redeem QR
The CODE must be scanned and activated within 30 days of being used.

*Note that the installation start time is calculated from the beginning.

*10-day unlimited data plan in Thailand, speed reduced to 384kbps after exceeding 50GB high-speed data limit, incoming calls free.

*Note: Voice and SMS add-on packages are not available for purchase. To restore voice functionality, you must re-authenticate your user identity at a True-dtac store.

*Neither physical SIM cards nor eSIMs can be inserted or installed in areas outside of coverage, otherwise the plan will fail and become unusable.

Thailand (10Mbps unlimited)

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: DTAC

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "www.dtac.co.th" / Leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[www.dtac.co.th]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*10Mbps throughout without slowdown

*You must scan and complete the installation within 180 days after redeeming the QR code to activate it (activate immediately after installation).

(Traffic reset) 00:00 Taiwan (UTC +8)/

(Date Reset) 00:00 Taiwan (UTC+8)

[Applicable Region] Thailand

Cambodia

【Cambodia】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Metfone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 Taiwan (UTC +8) /

(Date Reset) 00:00 Taiwan (UTC +8)

【Applicable Region】Cambodia

Vietnam

【Vietnam】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Vietnamobile, Vinaphone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter 【mobile.three.com.hk】 / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter 【mobile.three.com.hk】 in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 Taiwan (UTC +8)/

(Date Reset) 00:00 Taiwan (UTC)
+8)

[Applicable Region] Vietnam

Vietnam, 5GB

[Vietnam, 5GB/day]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Vinaphone, Mobifone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter cmhk or cmlink) / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "cmhk or cmlink" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*5GB of data usage per day in the covered areas

*After redeeming the QR code, you must scan and activate it within 180 days (activation will begin immediately after scanning).

(Traffic reset) 00:00 Taiwan (UTC +8)/

(Date Reset) 00:00 Taiwan (UTC +8)

[Applicable Region] Vietnam

Vietnam, 7GB

[Vietnam, 7GB/day]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: vinaphone, mobifone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter cmhk or cmlink) / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "cmhk or cmlink" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*7GB of data usage per day in the covered areas

*After redeeming the QR code, you must scan and activate it within 180 days (activation will begin immediately after scanning).

(Traffic reset) 00:00 Taiwan (UTC +8)/

(Date Reset) 00:00 Taiwan (UTC +8)

[Applicable Region] Vietnam

Vietnam Mobifone

【Vietnam】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Mobifone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "m-wap" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[m-wap]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*Dial 900 and press 1 upon arrival in Vietnam to activate.
to activate on arrival

*Check number:*0#

*Check data usage: Dial *090*5# or send SMS "KT ALL" to 9199

*5 days of 30GB data within the coverage area, free incoming calls and SMS messages.

*You must scan and activate the QR code within 30 days of redeeming it.

[Applicable Region] Vietnam

the Philippines

【the Philippines】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Globe

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter 【mobile.three.com.hk】 / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter 【mobile.three.com.hk】 in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 Taiwan (UTC +8)/

(Date Reset) 00:00 Taiwan (UTC +8)

[Applicable Region] Philippines

Australia

【Australia】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Optus

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "mobile") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

Data reset (traffic reset) 00:00 Taiwan (UTC +8)/

Date reset 00:00 Taiwan (UTC +8)

【Applicable Regions】Australia

Australia - Vodafone, call charges

[Australia - Vodafone]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Vodafone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "live.vodafone.com" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[live.vodafone.com]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*Check traffic: BAL to 126101

*Note that the QR code will be activated immediately after redemption.

*After scanning the QR code to install, you will need to enter a verification code. Please contact Yosim customer service for the verification code.

*10GB coverage area for 15 days, unlimited local calls

*ESIM QR code scanning will fail after a maximum of three repeated scans.

(Date reset) Australia (UTC +9.5)

【Applicable Regions】Australia

Australia and New Zealand

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider:

Australian telecommunications operator: Telstra

New Zealand telecommunications operator: Spark

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter 【mobile.three.com.hk】 / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter 【mobile.three.com.hk】 in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Data reset: 00:00 Taiwan
(UTC+8)

Date reset: 00:00 Taiwan
(UTC+8)

【Applicable Regions】New Zealand, Australia

Plus New Zealand and Australia

【Plus Australia & New Zealand】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Australian telecommunications operator: YES OPTUS - 5G/4G

New Zealand telecommunications operator: Vodafone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (Enter "Plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[Plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

【Applicable Regions】 New Zealand, Australia

Taiwan

【Taiwan】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7.
Both "Mobile Data" and "Roaming" need to be enabled.

8.
Choose your internet service provider: Chunghwa Telecom

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Data reset (traffic reset) 00:00 Taiwan (UTC +8)/

Date reset 00:00 Taiwan (UTC +8)

【Applicable Region】Taiwan

UAE

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an Internet service provider: DU

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Number of days: 24 hours (less than 1 hour is counted as 1 hour)

Reset: 0:00 (UTC+8)

[Applicable Regions] UAE

India

【India】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Bharti Airtel, Vodafone, Idea, Jio

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "mobile") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 Taiwan (UTC +8)/

(Date Reset) 00:00 Taiwan (UTC +8)

[Applicable Regions] India

Morocco, 30 days, 10GB

[Morocco, 30 days, 10GB]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Maroc Telecom, Orange

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "data.sim or bicsapn" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "data.sim or bicsapn" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*You must scan and activate the QR code within 30 days of redeeming it.

(Date Reset) 24hr

[Applicable Region] Morocco

AT&T in the United States

AT&T (USA)

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: AT&T

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Region] United States

American Dual Telecom A

[US Dual Telecom A]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: T-Mobile, Verizon

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Number of days: 24 hours (less than 1 hour is counted as 1 hour)

Reset: 0:00 (UTC+8)

[Applicable Region] United States

US, Canada and Mexico

[USA, Canada, Mexico]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8.
Select network

US telecom operators: T-Mobile, Verizon

Canadian telecommunications operator: Rogers

Mexican telecommunications operators: AT&T, Telcel

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*Not supported in Yellowknife and Banff National Park

Number of days: 24 hours (less than 1 hour is counted as 1 hour)

Reset: 0:00 (UTC+8)

[Applicable Regions] USA, Canada, Mexico

North America A

【North America A】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider:

US telecom operators: AT&T, Verizon

Canadian telecommunications operators: WIND, Telus, Bell, SaskTel, Rogers

Mexican telecommunications operators: Movistar, AT&T

Panamanian telecommunications operator: Telefonica

Costa Rican telecommunications operator: Telefonica

El Salvadoran telecommunications operator: Telef El Salvador

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] USA, Canada, Mexico, Panama, Costa Rica, El Salvador

South America A

[South America A]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Brazilian telecommunications operators: Vivo, TIM

Argentine telecommunications operators: Movistar, Personal

Chilean telecommunications operator: Movistar

Ecuadorian telecommunications operator: Movistar

Peruvian telecommunications operator: Movistar

Uruguayan telecommunications operator: Movistar

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] Brazil, Argentina, Chile, Ecuador, Peru, Uruguay

BICS Europe

[BICS Europe]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Austrian telecommunications operator: A1 Telekom/Three

Belgian telecommunications operator: Proximus

Bulgarian telecommunications operators: Mobiltel / Yettel

Icelandic telecommunications operator: Siminn hf. / Syn hf

Croatian telecommunications operators: Tele2 / Vipnet

Cypriot telecom operators: Cyta-Vodafone / MTN

Czech Republic telecommunications operators: O2 / Vodafone

Danish telecommunications operator: TDC / Telenor

Estonian telecommunications operators: EMT / Tele2

Finnish telecommunications operator: Alands Telekom / DNA
/ Elisa / Telia Company

French telecommunications operators: Bouygues/Digicel/Free
Mobile/Orange/SFR

Outremer, a telecommunications operator in French Guiana.
Telecom/Digicel Mobile Antilles/Dauphin Telecom

German telecommunications operators: Telefonica / Vodafone

Greek telecommunications operators: Nova / Vodafone

Hungarian telecommunications operators: Yettel / Vodafone

Irish telecommunications operator: Meteor (eir) / O2 /
Three

Italian telecommunications operators: ILIAD / Vodafone /
Wind / Wind Tre

Latvian telecommunications operators: Bite / LMT / Tele2

Liechtenstein telecommunications operator: FL1 / Orange

Lithuanian telecommunications operators: Bite / Tele2 / Telia
Lietuva

Luxembourg telecommunications operator: POST Luxembourg /
Tango

Malta's telecommunications operator: GO / Vodafone

Dutch telecommunications operator: KPN (iBasis) /
Vodafone

Norwegian telecommunications operators: NetCom / Telenor

Polish telecommunications operator: Orange / P4 PLAY /
Plus

Portuguese telecommunications operators: MEO / NOS
Comunicacoes sa

Romanian telecommunications operator: Orange / Vodafone

Slovakian telecommunications operator: O2 / Orange

Slovenian telecommunications operators: Mobitel / Telemach -
5G/4G

Spanish telecommunications operator: Orange / Telefonica
Spain / Vodafone / Xfera

Swedish telecommunications operators: Tele2 / Telenor /
Telia

Swiss telecommunications operator: Salt Mobile SA /
Sunrise

Orange, a telecommunications operator in Reunion Island
Reunion/Societe Reunionnaise

Gibraltar telecommunications operator: Gibtelecom Ltd.
5G/4G

British telecommunications operators: O2 / Three / Vodafone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter 【bicsapn or
internet.proximus.be /Username and password are blank and do not need to be entered.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "bicsapn or internet.proximus.be" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 (UTC +0)/

(Date Reset) 00:00 (UTC +0)

[Applicable Regions] Same as Telecom section

Orange native SIM card for European calling

[Orange Native SIM Card with European Calling Functionality]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select Internet service provider: Automatic

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter [APN: orange]

User name: orange

Password: orange / Username and password should be left blank and not required.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

User name: orange

Password: orange / - Keep and select

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Default PIN: 0000

Check usage: #123#

Check number: dial 225

* 30 days of 12GB data coverage in covered countries, unlimited calls within covered areas, 30 minutes of global calls, and 200 SMS messages in covered countries.

*Starting from April 10, 2025 (French time), newly activated 14-day plans will be upgraded to 30-day plans, with no change in data allowance.

*You must scan the QR code to activate it within 180 days after redeeming it (scan to activate immediately).

[Applicable Regions]

Andorra, Azores, Åland Islands, Germany, Austria, Balearic Islands, Belgium, Bulgaria, Canary Islands, Cyprus, Corfu, Crete, Cyclades, Croatia, Denmark, Spain, Estonia, Faroe Islands, Finland, France, Gibraltar, Greece, Guernsey, Hungary, Ireland, Iceland, Italy, Jersey, Latvia, Liechtenstein, Lithuania, Luxembourg, Madeira, Malta, Isle of Man, Norway, Netherlands, Poland, Portugal, Czech Republic, Rhodes, Romania, United Kingdom, San Marino, Sardinia, Sicily, Slovakia, Switzerland, Sweden, Vatican City, Slovenia.

UK, Unlimited

[UK, Unlimited]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider: three UK

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "mobile") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[mobile]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 Taiwan (UTC +8)/

(Date Reset) 00:00 Taiwan (UTC +8)

[Applicable Region] United Kingdom

Türkiye

【Türkiye】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: AVEA (turk telekom), Vodafone, Turkcell

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Region] Türkiye

Africa A

【Africa A】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network:

Algerian telecommunications operator: Orascom Algeria / Oreedo

Tunisian telecommunications operators: Ooredoo / Tunisie / Orange

Egyptian telecommunications operator: Etisalat

South African telecommunications operator: Telkom SA

Ghanaian telecommunications operator: Airtel 3G network

Reunion Island telecommunications operator: TELCO

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] Algeria, Tunisia, Egypt, South Africa, Ghana, Réunion

Saudi Arabia

【Saudi Arabia】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet telecommunications provider: STC (Saudi Telecom Co.)

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0:00 (UTC+8)

[Applicable Regions] Saudi Arabia

Sri Lanka

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Mobitel

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Region] Sri Lanka

Bengal

【Bengal】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: Banglalink Digital

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Region] Bangladesh

CMI Global Multi-Region

[CMI Global Multiple Regions]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select Internet service provider: Automatic detection

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "cmlink" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The solution will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "【cmlink】" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*You must scan and activate the QR code within 30 days of redeeming it.

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 24 hours (less than 1 hour will be counted as 1 hour)

[Applicable Regions]

Albania, Algeria, Anguilla, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bangladesh, Barbados, Belarus, Belgium, Bermuda, Bosnia and Herzegovina, Brazil, British Virgin Islands, Brunei, Bulgaria, Cambodia, Cameroon, Canada, Cayman Islands, Central African Republic, Chile, Colombia, Costa Rica, Ivory Coast, Croatia, Cyprus, Czech Republic, Democratic Republic of Congo, Denmark, and many other countries. Minica, Dominican Republic, Egypt, Ecuador, El Salvador, Estonia, Faroe Islands, Fiji, Finland, France, French Guiana, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guam, Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kuwait, Kyrgyzstan, Laos, Latvia Vietnam, Liberia, Lithuania, Luxembourg, Macau, Madagascar, Malaysia, Malta, Malawi, Martinique, Mauritius, Mexico, Moldova, Mongolia, Montenegro, Morocco, Mozambique, Nepal, Netherlands, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saudi Arabia, Serbia, Seychelles, Sierra Leone Leon, Singapore, Slovakia, Slovenia, South Africa, South Korea, Spain, Sri Lanka, Saint Kitts and Nevis, Saint Lucia, Saint Vincent, Sudan, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turks and Caicos Islands, United Arab Emirates, Uganda, Ukraine, United Kingdom, Uruguay, United States, Uzbekistan, Vanuatu, Vietnam, Yemen, Zambia, Curaçao, Guyana

Multiple Asian regions and 11 countries

[Multiple Asian locations and 11 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Mainland China telecommunications operators: ChinaUnicom, ChinaTelecom

Hong Kong telecommunications operator: CSL

Macau telecommunications operator: CTM

Singaporean telecommunications operator: Singtel

Malaysian telecommunications operator: Maxis

Thai telecommunications operators: AIS, DTAC

Indonesian telecommunications operator: Telkomsel

Vietnamese telecommunications operators: Mobifone, Vietnamobile

Philippine telecommunications operator: Globe

Japanese telecommunications operators: KDDI, Softbank

South Korean telecommunications operators: SKT, KT

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "mobile") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 Taiwan (UTC +8) /

(Date Reset) 00:00 Taiwan (UTC +8)

[Applicable Regions] Same as Telecom section

Multiple regions A 25 countries

[Multiple regions A, 25 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Australian telecommunications operators: Telstra, Optus

Macau telecommunications operator: CTM

Telenor, a Pakistani telecommunications operator

Dominican telecommunications operator: Orange

Russian telecommunications operator: MTS

Philippine telecommunications operator: Globe

South Korean telecommunications operators: SKT, KT, LG U+

Cambodian telecommunications operator: MetFone

Kuwaiti telecommunications operator: VIVA Kuwait

Malaysian telecommunications operators: Maxis, Digi

US telecom operator: T-Mobile

Nigerian telecommunications operator: Glo Mobile Limited, Nigeria

Japanese telecommunications operators: SoftBank, KDDI

Sri Lankan telecommunications operators: Etisalat Lanka, Hutchison Telecom

Taiwanese telecommunications operator: CHT

Thai telecommunications operators: DTAC, AIS

Turkish telecommunications operator: Turkcell

Hong Kong telecommunications operator: HKT

Singaporean telecommunications operators: Singtel, Starhub

New Zealand telecommunications operators: TNZ, 2Degrees

Israeli telecommunications operators: Pelephon, Partner

Indian telecom operators: Bharti Airtel, Vodafone

Indonesian telecom operator: Telkomsel - 5G/4G

Vietnamese telecommunications operators: Mobifone, Vietnamobile

Chinese telecom operator: China Unicom

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "mobile") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 Taiwan (UTC +8)/

(Date Reset) 00:00 Taiwan (UTC +8)

[Applicable Regions] Same as Telecom section

Multiple regions F 45 countries

[Multiple regions, F 45 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Albanian telecommunications operator: Vodafone

Irish telecommunications operators: Meteor Mobile, H3G

Estonian telecommunications operators: Elisa, Tele2

Austrian telecommunications operators: A1, T-Mobile

Bulgarian telecommunications operators: Vivacom, Telenor (Yettel)

Belgian telecommunications operators: Telenet (BASE), ORANGE (OBE)

Icelandic telecommunications operator: Vodafone

Polish telecommunications operator: Polkomtel (Plus)

Pakistani telecommunications operator: Jazz

Danish telecommunications operators: TDC, Telenor

German telecommunications operators: O2, T-Mobile (Telekom.de)

French telecommunications operators: Bouygues, Orange

Finnish telecommunications operators: Elisa, DNA, Alcom

Kazakhstan telecommunications operator: KaR Tel (beeline)

Dutch telecommunications operators: KPN, Odido (T-Mobile)

Czech Republic telecommunications operators: T-Mobile, O2

Kyrgyzstan's telecommunications operator: Sky Mobile (Beeline KG)

Croatian telecommunications operator: Tele2
(TM HR), Hrvatski (HT HR)

Latvian telecommunications operator: Bite

Lithuanian telecommunications operators: Bite, Tele2

Liechtenstein telecommunications operator: Telecom Liechtenstein

Luxembourg telecommunications operator: Orange

Romanian telecommunications operators: Orange, DIGI

Maltese telecommunications operator: Vodafone
(Epic), Melita

US telecommunications operator: AT&T

Moldova's telecommunications operator: Orange

Norwegian telecommunications operator: Teleno

Portuguese telecommunications operators: Optimus, TMN/MEO, Vodafone

Swedish telecom operators: Telenor, H3G (3 SE)

Swiss telecommunications operators: Sunrise, Salt

Cypriot telecommunications operator: MTN

Slovakian telecommunications operators: O2, DT (Telekom)

Slovenian telecommunications operator: Telemach

Turkish telecommunications operator: AVEA (turk)
telekom), Vodafone, Turkcell

Ukrainian telecommunications operators: KyivStar, MTS

Uzbekistan's telecommunications operator: Unitel (beeline)

Spanish telecommunications operators: Movistar, Orange, Yoigo

Greek telecommunications operators: Wind, Cosmote, Vodafone

Hungarian telecommunications operators: Telenor (Yettel), T-Mobile (Telekom)

Israeli telecommunications operators: Hot Mobile, Pelephone

Italian telecommunications operators: Wind, Vodafone

New Zealand telecommunications operator: Vodafone (One NZ)

Montenegrin telecommunications operator: MTEL

Serbian telecommunications operator: Telenor (Yettel)

British telecommunications operators: O2, EE

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] Same as Telecom section

G49 countries in multiple regions

[G 49 in multiple regions]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider:

Albanian telecom operator: Vodafone

Irish telecommunications operators: Meteor Mobile, H3G

Estonian telecommunications operators: Elisa, Tele2

Austrian telecommunications operators: A1, T-Mobile

Bulgarian telecommunications operators: Vivacom, Telenor (Yettel)

Belgian telecommunications operators: Telenet, ORANGE

Icelandic telecom operators: Vodafone, Nova

Polish telecommunications operator: Polkomtel (Plus)

Pakistani telecommunications operator: Jazz

Danish telecommunications operators: TDC, Telenor

German telecommunications operators: O2, T-Mobile (Telekom.de), Vodafone

French telecommunications operators: Bouygues, Orange, SFR

Finnish telecommunications operators: Elisa, DNA, Alcom

Kazakhstan's telecommunications operator: KaR Tel
(beeline)

Dutch telecommunications operators: KPN, Odido (T-Mobile)

Czech Republic telecommunications operators: T-Mobile, O2

Kyrgyzstan's telecommunications operator: Sky Mobile (BeelineKG)

Croatian telecommunications operators: Tele2 (TM HR), Hrvatski (HT HR)

Latvian telecommunications operators: Bite, Tele2

Lithuanian telecommunications operators: Bite, Tele2

Liechtenstein telecommunications operator: Telecom
Liechtenstein

Luxembourg telecommunications operators: Orange, Tango

Romanian telecommunications operators: Orange, DIGI

Maltese telecom operators: Vodafone (Epic), Melita - 5G/4G

US telecommunications operators: AT&T, Verizon Wireless

Moldova's telecommunications operator: Orange

Norwegian telecommunications operators: Telenor, Telia

Portuguese telecommunications operators: Optimus, TMN/MEO, Vodafone

Swedish telecommunications operators: Telenor, H3G (3 SE)

Swiss telecommunications operators: Sunrise, Salt

Cypriot telecom operators: MTN, Primetel; Slovakia: O2, DT - 5G/4G

Slovenian telecommunications operators: Telemach, A1

Turkish telecommunications operators: AVEA (Turk Telekom), Vodafone, Turkcell

Ukrainian telecom operators :) KyivStar, MTS - 4G

Uzbekistan's telecommunications operator: Unitel (Beeline)

Spanish telecommunications operators: Movistar, Orange, Yoigo

Greek telecommunications operators: Wind, Cosmote, Vodafone

Hungarian telecommunications operators: Telenor (Yettel), T-Mobile (Telekom)

Israeli telecommunications operators: Hot Mobile, Pelephone

Italian telecommunications operators: Wind, Vodafone

British telecommunications operators: O2, EE

Montenegrin telecommunications operator: MTEL

New Zealand telecommunications operator: Vodafone

Tunisian telecommunications operators: Tunisie, Orange

Kuwaiti telecommunications operator: Zain

Armenian telecommunications operator: Vivacell

Serbian telecommunications operator: Telenor

Belarusian telecommunications operator: Unitary Velcom

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] Same as Telecom section

Multiple regions H 66 countries

[Multiple regions, 66 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Albanian telecommunications operator: Vodafone

Irish telecommunications operators: Meteor Mobile, H3G

Estonian telecommunications operators: Elisa, Tele2

Austrian telecommunications operators: A1, T-Mobile

Bulgarian telecommunications operators: Vivacom, Telenor (Yettel)

Belgian telecommunications operators: Telenet, ORANGE

Icelandic telecom operators: Vodafone, Nova

Polish telecommunications operator: Polkomtel (Plus)

Pakistani telecommunications operator: Jazz

Danish telecommunications operators: TDC, Telenor

German telecommunications operators: O2, T-Mobile (Telekom.de), vodafone

French telecommunications operators: Bouygues, Orange, SFR

Finnish telecommunications operators: Elisa, DNA, Alcom

Kazakhstan telecommunications operator: KaR Tel (beeline)

Dutch telecommunications operators: KPN, Odido (T-Mobile)

Czech Republic telecommunications operators: T-Mobile, O2

Kyrgyzstan's telecommunications operator: Sky Mobile (Beeline KG)

Croatian telecommunications operators: Tele2 (TM HR), Hrvatski (HT HR)

Latvian telecommunications operators: Bite, Tele2

Lithuanian telecommunications operators: Bite, Tele2

Liechtenstein telecommunications operator: Telecom Liechtenstein

Luxembourg telecommunications operators: Orange, Tango

Romanian telecommunications operators: Orange, DIGI

Maltese telecommunications operators: Vodafone (Epic), Melita

US telecommunications operators: AT&T, Verizon Wireless

Moldova's telecommunications operators: Orange, Moldcell

Norwegian telecommunications operators: Teleno, Telia

Portuguese telecommunications operators: Optimus, TMN/MEO, Vodafone

Swedish telecom operators: Telenor, H3G (3 SE)

Swiss telecommunications operators: Sunrise, Salt

Cypriot telecommunications operators: MTN, Primetel

Slovakian telecommunications operators: O2, DT

Slovenian telecommunications operators: Telemach, A1

Turkish telecommunications operator: AVEA (turk)
telekom), Vodafone, Turkcell

Ukrainian telecommunications operators: KyivStar, MTS

Uzbekistan's telecommunications operator: Unitel (beeline)

Spanish telecommunications operators: Movistar, Orange, Yoigo

Greek telecommunications operators: Wind, Cosmote, Vodafone

Hungarian telecommunications operators: Telenor (Yettel), T-Mobile (Telekom)

Israeli telecommunications operators: Hot Mobile, Pelephone

Italian telecommunications operators: Wind, Vodafone

British telecommunications operators: O2, EE

Montenegrin telecommunications operator: MTEL

New Zealand telecommunications operator: Vodafone

Tunisian telecommunications operators: Tunisie, Orange

Kuwaiti telecommunications operator: Zain

Armenian telecommunications operator: Vivacell (MTS)

Belarusian telecommunications operator: Unitary velcom

Sri Lankan telecommunications operator: Mobitel

Indian telecom operators: Idea, Vodafone

Georgian telecommunications operators: Geocell, Mobitel (Beeline)

Vodafone, a telecommunications operator in the Faroe Islands.

Algerian telecommunications operator: Orascom (djezzy)

Australian telecommunications operator: Vodafone

Macedonian telecommunications operator: VIP Mobile (A1)

Serbian telecommunications operator: VIP Mobile (A1)

Telecommunications operator in Réunion, France: TELCO / 4G

Azerbaijani telecommunications operators: Azercell, Bakcell

Qatari telecommunications operator: Vodafone Ooredoo

Andorra Telecom

Kosovo telecommunications operators: IPKO / 4G

Bahrain's telecom operators: Zain / 5G/4G

Russian telecommunications operator: VimpelCom (beeline)

Bosnian and Herzegovina telecommunications operator: BH Telecom

Ghanaian telecommunications operator: Airtel (Tigo) 3G

Tajik telecommunications operator: TT Mobile

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] Same as Telecom section

Multiregional I 77 countries

[Multiple regions | 77 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider:

Albanian telecommunications operator: Vodafone

Irish telecommunications operators: Meteor Mobile, H3G

Estonian telecommunications operators: Elisa, Tele2

Austrian telecommunications operators: A1, T-Mobile

Bulgarian telecommunications operators: Vivacom, Telenor (Yettel)

Belgian telecommunications operators: Telenet, ORANGE

Icelandic telecom operators: Vodafone, Nova

Polish telecommunications operator: Polkomtel (Plus)

Pakistani telecommunications operator: Jazz

Danish telecommunications operators: TDC, Teleno

German telecommunications operators: O2, T-Mobile (Telekom.de), vodafone

French telecommunications operators: Bouygues, Orange, SFR

Finnish telecommunications operators: Elisa, DNA, Alcom

Kazakhstan telecommunications operator: KaR Tel (beeline)

Dutch telecommunications operators: KPN, Odido (T-Mobile)

Czech Republic telecommunications operators: T-Mobile, O2

Kyrgyzstan's telecommunications operator: Sky Mobile (Beeline KG)

Croatian telecommunications operators: Tele2 (TM HR), Hrvatski (HT HR)

Latvian telecommunications operators: Bite, Tele2

Lithuanian telecommunications operators: Bite, Tele2

Liechtenstein telecommunications operators: Telecom Liechtenstein, Orange

Luxembourg telecommunications operators: Orange, Tango

Romanian telecommunications operators: Orange, DIGI

Maltese telecommunications operators: Vodafone (Epic), Melita

US telecommunications operators: AT&T, Verizon Wireless

Moldova's telecommunications operators: Orange, Moldcell

Norwegian telecommunications operators: Teleno, Telia

Portuguese telecommunications operators: Optimus, TMN/MEO, Vodafone

Swedish telecommunications operators: Telenor, H3G (3 SE)

Swiss telecommunications operators: Sunrise, Salt

Cypriot telecommunications operators: MTN, Primetel

Slovakian telecommunications operators: O2, DT

Slovenian telecommunications operators: Telemach, A1

Turkish telecommunications operator: AVEA (turk)
telekom), Vodafone, Turkcell

Ukrainian telecommunications operators: KyivStar, MTS

Uzbekistan's telecommunications operator: Unitel (beeline)

Spanish telecommunications operators: Movistar, Orange, Yoigo

Greek telecommunications operators: Wind, Cosmote, Vodafone

Hungarian telecommunications operators: Telenor (Yettel), T-Mobile (Telekom)

Israeli telecommunications operators: Hot Mobile, Pelephone

Italian telecommunications operators: Wind, Vodafone

British telecommunications operators: O2, EE

Montenegrin telecommunications operator: MTEL

New Zealand telecommunications operator: Vodafone

Tunisian telecommunications operators: Tunisie, Orange

Kuwaiti telecommunications operator: Zain

Armenian telecommunications operator: Vivacell (MTS)

Belarusian telecommunications operator: Unitary velcom

Sri Lankan telecommunications operator: Mobitel

Indian telecom operators: Idea, Vodafone

Georgian telecommunications operators: Geocell, Mobitel (Beeline)

Vodafone, a telecommunications operator in the Faroe Islands.

Algerian telecommunications operator: Orascom (djezzy)

Australian telecommunications operator: Vodafone

Macedonian telecommunications operator: VIP Mobile (A1)

Serbian telecommunications operator: VIP Mobile (A1)

Telecommunications operator in Reunion Island, France: TELCO

Azerbaijani telecommunications operators: Azercell, Bakcell

Qatari telecommunications operator: Vodafone Ooredoo

Andorra Telecom

Kosovo telecommunications operator: IPKO

Bahraini telecommunications operator: Zain

Russian telecommunications operator: VimpelCom (beeline)

Bosnian and Herzegovina telecommunications operator: BH Telecom

Ghanaian telecommunications operator: Airtel 3G

Bangladeshi telecom operator: Grameenphone

Gibraltar telecommunications operator: Gibtelecom

Canadian telecommunications operators: Telus, Bell, SaskTel, Roger

Egyptian telecommunications operators: Etisalat, orange

French Guiana telecommunications operator: Bouygues/DigiCel

Etisalat, a telecommunications operator in the United Arab Emirates

Iraqi telecommunications operator: Korek Telecom

Saudi Arabian telecommunications operator: Etisalat

Telecom operators in the Isle of Man, Guernsey, and Jersey: Manx, Sure

Moroccan telecommunications operator: Medi (orange)

Tajik telecommunications operator: TT Mobile

Vodafone, a Fijian telecommunications operator

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] Same as Telecom section

J115 countries in multiple regions

[Multiple regions, J 115 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7.
Both "Mobile Data" and "Roaming" need to be enabled.

8. Choosing an internet service provider:

Albanian telecommunications operator: Vodafone

Irish telecommunications operators: Meteor Mobile, H3G

Estonian telecommunications operators: Elisa, Tele2

Austrian telecommunications operators: A1, T-Mobile

Bulgarian telecommunications operators: Vivacom, Telenor (Yettel)

Belgian telecommunications operators: Telenet (BASE), ORANGE (OBE)

Icelandic telecom operators: Vodafone, Nova

Polish telecommunications operator: Polkomtel (Plus)

Pakistani telecommunications operator: Jazz

Danish telecommunications operators: TDC, Telenor

German telecommunications operators: O2, T-Mobile (Telekom.de), vodafone

French telecommunications operators: Bouygues, Orange, SFR

Finnish telecommunications operators: Elisa, DNA, Alcom

Kazakhstan telecommunications operator: KaR Tel (beeline)

Dutch telecommunications operators: KPN, Odido (T-Mobile)

Czech Republic telecommunications operators: T-Mobile, O2

Kyrgyzstan's telecommunications operator: Sky Mobile (Beeline KG)

Croatian telecommunications operators: Tele2 (TM HR), Hrvatski (HT HR)

Latvian telecommunications operators: Bite, Tele2

Lithuanian telecommunications operators: Bite, Tele2

Liechtenstein telecommunications operators: Telecom Liechtenstein, Orange

Luxembourg telecommunications operators: Orange, Tango

Romanian telecommunications operators: Orange, DIGI

Maltese telecommunications operators: Vodafone (Epic), Melita

US telecom operators: AT&T, Verizon

Moldova's telecommunications operators: Orange, Moldcell

Norwegian telecommunications operators: Teleno, Telia

Portuguese telecommunications operators: Optimus, TMN/MEO, Vodafone

Swedish telecommunications operators: Telenor, H3G (3 SE)

Swiss telecommunications operators: Sunrise, Salt

Cypriot telecommunications operators: MTN, Primetel

Slovakian telecommunications operators: O2, DT

Slovenian telecommunications operators: Telemach, A1

Turkish telecommunications operator: AVEA (turk)
telekom), Vodafone, Turkcell

Ukrainian telecommunications operators: KyivStar, MTS

Uzbekistan's telecommunications operator: Unitel (beeline)

Spanish telecommunications operators: Movistar, Orange, Yoigo

Greek telecommunications operators: Wind, Cosmote, Vodafone

Hungarian telecommunications operators: Telenor, T-Mobile

Israeli telecommunications operators: Telenor (Yettel), T-Mobile (Telekom)

Italian telecommunications operators: Wind, Vodafone

British telecommunications operators: O2, EE

Montenegrin telecommunications operators: MTEL, Crnogorski
Telekom

New Zealand telecommunications operator: Vodafone (One NZ)

Tunisian telecommunications operators: Tunisie, Orange

Kuwaiti telecommunications operator: Zain

Armenian telecommunications operators: Vivacell (MTS), UCOM

Belarusian telecommunications operator: Unitary velcom

Sri Lankan telecommunications operators: Mobitel, Etisalat

Indian telecom operators: Idea, Vodafone

Georgian telecommunications operators: Geocell, Mobitel (Beeline)

Vodafone, a telecommunications operator in the Faroe Islands.

Algerian telecommunications operator: Orascom (djezzy)

Australian telecommunications operators: Optus, Vodafone

Macedonian telecommunications operator: VIP Mobile (A1)

Serbian telecommunications operator: VIP Mobile (A1)

Telecommunications operator in Reunion Island, France: TELCO

Azerbaijani telecommunications operators: Azercell, Bakcell

Qatari telecom operators: Vodafone, Ooredoo

Andorra Telecom

Kosovo telecommunications operator: IPKO

Bahraini telecommunications operator: Zain

Russian telecommunications operator: VimpelCom (beeline)

Bosnian and Herzegovina telecommunications operators: BH Telecom, Public Enterprise

Ghanaian telecom operators: Airtel (Tigo), Vodafone 3G

Bangladeshi telecom operator: Grameenphone

Gibraltar telecommunications operator: Gibtelecom

Canadian telecommunications operators: Telus, Bell, SaskTel, Roger, WIND Mobile

Egyptian telecommunications operators: Etisalat, orange

French Guiana telecommunications operator: Bouygues/DigiCel

Etisalat, a telecommunications operator in the United Arab Emirates

Iraqi telecommunications operator: Korek Telecom

Saudi Arabian telecommunications operator: Etisalat

Telecom operators in the Isle of Man, Guernsey, and Jersey: Manx, Sure

Moroccan telecommunications operators: Medi (orange), Wana

Nepalese telecommunications operator: Ncell

Nigerian telecommunications operators: Glo, Airtel/ZAIN

Tanzanian telecommunications operator: ZAIN/Celtel Tanzania

Airtel Madagascar, a telecommunications operator in Madagascar

Kenyan telecommunications operator: Zain/Celtel Kenya

Chadian telecommunications operators: Zain/Airtel/Celtel Chad

ZAIN, a telecommunications operator in the Democratic Republic of Congo

Gabonese telecommunications operator: ZAIN/Celtel

Airtel Malawi Limited, a telecommunications operator in Malawi.

Mexican telecommunications operators: AT&T Mexico, Telcel
Mexico

Airtel Congo Rep, a telecommunications operator in the Republic of Congo

Ugandan telecommunications operators: Airtel, Warid
Uganda

Guadeloupe telecommunications operator: Dauphin

Niger's telecommunications operator: Zain/CelTel

Brazilian telecommunications operators: Claro, TIM

El Salvadorian telecommunications operator: Personal El Salvador

Argentine telecommunications operators: Personal, AMX/Claro

Setel, a telecommunications operator in the Netherlands Antilles.

Cayman Islands telecommunications operators: LIME / Cable & Wirel

Montserrat telecommunications operator: Cable & Wireless

Saint Kitts and Nevis telecommunications operators: Cable & Wireless

Saint Lucia telecommunications operator: C & W

Saint Vincent and the Grenadines telecommunications operator: C & W

Barbados telecommunications operator: C & W

Anguilla telecommunications operator: C & W

Antigua and Barbuda telecommunications operator: C & W

Turks and Caicos Islands telecommunications operators: C & W

British Virgin Islands telecommunications operator: C & W

Dominica telecommunications operator: C & W

Grenada telecommunications operator: C & W

Jamaican telecommunications operator: C & W

Jordanian telecommunications operator: ZAIN

Colombian telecommunications operator: Tigo

Paraguayan telecommunications operator: Tigo

Benin telecommunications operator: Celtiis

Panamanian telecommunications operator: Cable

Uruguayan telecommunications operator: Antel

Tajik telecommunications operator: TT Mobile

Vodafone, a Fijian telecommunications operator

Mauritian telecommunications operator: Cellplus Mobile

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] Same as Telecom section

Multi-region TT 13 countries

[TT in 13 countries across multiple regions]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Hong Kong telecommunications operator: 3HK

Macau telecommunications operators: 3MAC

China Unicom (a telecommunications operator in mainland China)

Taiwanese telecommunications operator: Chunghwa

Malaysian telecommunications operators: Celcom, Digi

Thai telecommunications operators: DTAC, AIS

Philippine telecommunications operator: Globe

Singaporean telecommunications operator: Singtel

Indonesian telecommunications operator: Telkomsel

SK Telecom (Korea) / 5G/4G

New Zealand telecommunications operator: Vodafone (One NZ)

Australian telecommunications operators: Optus, Vodafone

Cambodian telecommunications operator: Viettel/Metphone

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (enter "plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Regions] Same as Telecom section

TRUE-Travel Asia 399

【TRUE-Travel Asia399】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Australian telecommunications operators: Optus AU, Telstra, Vodafone AU

Macau telecommunications operators: 3 Macau, CTM

Pakistani telecommunications operators: Jazz, ZONG

Bahrain's telecommunications operators: BATELCO, Zain BH

Bhutanese telecommunications operator: BT B-Mobile

Philippine telecommunications operators: Globe Telecom-PH, Smart

Telecom operators in Saipan and Guam: DOCOMO PACIFIC, IT&E

Kazakhstani telecommunications operators: Beeline KZ, Tele2

South Korean telecommunications operators: KOR SK Telecom, KT

Kyrgyz telecommunications operators: Beeline KG, MEGA

Qatari telecom operators: Ooredoo, Vodafone

Kuwaiti telecommunications operators: Ooredoo, ZAIN KW

Lao telecommunications operators: ETL Mobile, LAO GSM, Unitel

Malaysian telecommunications operators: Digi, CELCOM, MAXIS, U MOBILE

Mongolian telecommunications operators: MN MobiCom, MONGOLIA UNITEL LLC

Bangladeshi telecom operators: Banglalink, Robi Axiata

Nepalese telecom operators: Ncell, Nepal Telecom

Georgian telecommunications operator: Cellfie

Japanese telecommunications operators: JP DOCOMO, KDDI, SoftBank

Saudi Arabian telecommunications operators: STC, Zain KSA

Sri Lankan telecommunications operators: DIALOG, Hutch, Mobitel LK

Taiwanese telecom operators: Chunghwa Telecom, Far EasTone, TW Mobile

Turkish telecom operators: TR TURKCELL, Vodafone

Brunei telecommunications operator: DSTCom

Uzbek telecommunications operators: Beeline UZ, UZB Ucell

Hong Kong telecommunications operators: 3. China Mobile HK, CSL

Singaporean telecommunications operators: SGP-M1, Singtel, StarHub

Armenian telecommunications operators: Beeline AM, MTS ARM

Israeli telecommunications operators: Hot Mobile Ltd., Partner IL

Indian telecom operators: IND Airtel, Vi India

Indonesian telecommunications operators: 3, INDOSAT, TELKOMSEL, XL

Jordanian telecommunications operator: Zain JO

Vietnamese telecommunications operators: Vietnamobile, VIETTEL, VN Mobifone, VN VINAPHONE

Chinese telecom operators: CHINA MOBILE, CHN-UNICOM

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "internet" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[internet]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*Check traffic:*116*1#

*Unlimited data for 10 days in the covered area, totaling 6GB of high-speed data; speed will be reduced to 128kbps after exceeding this limit.

*You must scan the QR code to activate it within 180 days after redeeming it (scan to activate immediately).

Number of days: 24 hours

[Applicable Regions] Same as Telecom section

TRUE-Travel World899

【TRUE-Travel World899】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Albanian telecommunications operator: VODA AL

Argentine telecommunications operator: AR - Movistar

UAE telecommunications operator: du

Egyptian telecommunications operators: Orange EG, Vodafone EG

Irish telecommunications operators: 3. IRL - METEOR, Vodafone IE

Estonian telecommunications operators: Tele2 EE, Telia

Austrian telecommunications operators: 3 AT, A1, Magenta-T

Australian telecommunications operators: Optus AU, Telstra Mobile, Vodafone AU

Macau telecommunications operators: 3 Macau, CTM

Pakistani telecommunications operators: Jazz, ZONG

Bahrain's telecommunications operators: BATELCO, Zain BH

Panamanian telecommunications operator: Movistar

Brazilian telecommunications operator: VIVO

Belarusian telecommunications operator: BY VELCOM

Bulgarian telecommunications operators: A1 Bulgaria, Telenor BG

Northern Ireland telecommunications operators: 3 UK, EE, O2 - UK, Vodafone UK

Belgian telecommunications operators: BASE, Orange B, ProXimus

Icelandic telecom operators: NOVA IS, Vodafone

Puerto Rican telecommunications operator: AT&T - 5G/4G

Polish telecom operators: Orange PL, Plus, T-Mobile.pl

Bosnian and Herzegovina telecommunications operator: BH Mobile

Bhutanese telecommunications operator: BT B-Mobile

Danish telecom operators: 3DK, TDC, Telenor DK, Telia DK

German telecommunications operators: o2-de, Telekom.de, vodafone.de

Russian telecom operators: Beeline, MegaFon RUS, MTS RUS, t2

Ecuadorian telecommunications operator: Movistar

French telecommunications operators: F SFR, F-Bouygues Telecom, Free, Orange F

Faroe Islands telecommunications operator: Foroya Tele

French Guiana telecommunications operator: F-Orange

Telecommunications operators in Vatican City: ITIM, ILIAD, Vodafone IT, WINDTRE

Philippine telecommunications operators: Globe Telecom-PH, Smart

Fiji's telecommunications operator: FJ Vodafone

Finnish telecommunications operators: FI DNA, FI elisa, Telia

Colombian telecommunications operator: Movistar

Greenland telecommunications operator :) Tusass

Guadeloupe telecommunications operator: F-Orange

Telecom operators in Saipan and Guam: DOCOMO PACIFIC, IT&E

Kazakhstani telecommunications operators: Beeline KZ, Tele2

South Korean telecommunications operators: KOR SK Telecom, KT

Dutch telecommunications operators: NL KPN, Vodafone NL

Kyrgyz telecommunications operators: Beeline KG, MEGA

Canadian telecommunications operators: Bell, Rogers Wireless, SaskTel, TELUS, Videotron

Ghanaian telecommunications operator: GH Vodafone

Czech Republic O2-CZ, T-Mobile CZ, Vodafone CZ

Qatari telecom operators: Ooredoo, Vodafone

Kuwaiti telecommunications operators: Ooredoo, ZAIN KW

Croatian telecommunications operators: HT HR, Tele2 HR

Latvian telecommunications operators: BITE LV, LV LMT, Tele2 LV

Lao telecommunications operators: ETL Mobile Network, LAO GSM, Unitel

Lithuanian telecommunications operators: LT BITE GSM, Tele2 LT, Telia LT

Liechtenstein telecommunications operators: FL1, Salt.li, Swisscom

Luxembourg telecommunications operators: L Orange-LU, L TANGO, POST

Romanian telecommunications operators: RO ORANGE, RO Vodafone RO

Maldives telecommunications operator: DHIRAAGU

Maltese telecommunications operator: epic

Malaysian telecommunications operators: Digi, MY CELCOM, MY MAXIS, U MOBILE

Martinique telecommunications operator: F-Orange

US (including Hawaii) telecommunications operators: AT&T, T-Mobile

U.S. Virgin Islands telecommunications operator: AT&T - 5G/4G

Mongolian telecommunications operators: MN MobiCom, MONGOLIA UNITEL LLC

Bangladeshi telecom operators: Banglalink, Robi Axiata

Moldovan telecommunications operator: Orange MD

Moroccan telecommunications operator: inwi

Monaco telecommunications operators: F SFR, F-Bouygues Telecom, Free, Orange F

Mozambican telecommunications operator: VodaCom-MZ

Mexican telecommunications operator: Movistar

South African telecommunications operator: VodaCom-SA

Nepalese telecom operators: Ncell, Nepal Telecom

Norwegian telecommunications operators: N Telenor, Telia

Portuguese telecommunications operators: NOS, Vodafone P

Georgian telecommunications operator: Cellfie

Japanese telecom operators: JP DOCOMO, KDDI, SoftBank - 5G/4G

Swedish telecommunications operators: 3 SE, Tele2, Telenor SE, TELIA S

Swiss telecommunications operators: Salt, Sunrise, Swisscom

Serbian telecommunications operator: Telenor SRB

Senegalese telecommunications operator: Free

Cypriot telecommunications operators: epic, PrimeTel PLC

Saudi Arabian telecommunications operators: STC, Zain KSA

Saint Barthelme Telecom Operator: F-Orange

Saint Martin telecommunications operator: F-Orange

San Marino telecommunications operators: ITIM, ILIAD, Vodafone IT, WINDTRE

Sri Lankan telecommunications operators: DIALOG, Hutch, Mobitel LK

Slovakian telecommunications operators: O2-SK, Orange SK, Telekom SK

Slovenian telecommunications operators: A1 SI, TELEMACH

Scottish telecommunications operators: 3 UK, EE, O2 - UK, Vodafone UK

Tajikistan telecommunications operator: TCELL

Taiwanese telecom operators: Chunghwa Telecom, Far EasTone, TW Mobile

Tanzanian telecommunications operator: VodaCom

Turkish telecom operators: TR TURKCELL, Vodafone Türkiye

Welsh telecommunications operators: 3 UK, EE, O2 - UK, Vodafone UK

Brunei telecommunications operator: DSTCom

Ukrainian telecommunications operator: UA-KYIVSTAR

Uzbek telecommunications operators: Beeline UZ, UZB Ucell

Spanish telecommunications operators: Movistar, Orange SP, Vodafone ES

Greek telecommunications operators: GR COSMOTE, Vodafone GR

Hong Kong telecommunications operators: 3. China Mobile HK, CSL

Singaporean telecommunications operators: SGP-M1, Singtel, StarHub

New Zealand telecommunications operators: 2degrees, Spark NZ, Vodafone NZ

Hungarian telecommunications operators: Telekom HU, Telenor HU, Vodafone HU

Armenian telecommunications operators: Beeline AM, MTS ARM

Israeli telecommunications operators: Hot Mobile Ltd., Partner IL

Italian telecommunications operators: ITIM, ILIAD, Vodafone IT, WINDTRE

Indian telecom operators: IND airtel, Vi India

Indonesian telecommunications operators: 3. IND INDOSAT, IND TELKOMSEL, IND XL

UK telecom operators: 3 UK, EE, O2-UK, Vodafone UK

Jordanian telecom operator: Zain JO - 5G/4G

Vietnamese telecommunications operators: Vietnamobile, VIETTEL, VN Mobifone, VN VINAPHONE

Chinese telecom operators: CHINA MOBILE, CHN-UNICOM

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "TRUE" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "TRUE" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*Check traffic:*116*1#

*15-day unlimited data plan, providing a total of 6GB of high-speed data. After this limit is exceeded, the network speed will be reduced to 128kbps.

*You must scan the QR code to activate it within 180 days after redeeming it (scan to activate immediately).

(Traffic reset) 00:00 (UTC +0)/

(Date Reset) 00:00 (UTC +0)

[Applicable Regions] Same as Telecom section

O2 EU, 30 days, 35GB

[O2 EU, 30 days, 35GB]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choose your internet service provider: O2

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "Auto Detect" / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "Auto Detect" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Installation is prohibited in areas not covered by the system, as it will render the device unusable and will not be eligible for a refund or replacement.)

*The QR code will be activated immediately after redemption. Installation is prohibited in areas not covered by the plan. Note that you cannot use content outside the plan, otherwise you will incur unpaid fees and your service will be suspended.

*30-day coverage with 35GB of data (50GB available in the UK), 500 minutes of EU calls, unlimited local UK calls and SMS, free incoming calls. Note that calls within the UK are only valid for UK calls and cannot be made to non-local numbers. Please note that you cannot use any services outside of this plan, otherwise your service will be suspended due to unpaid charges.

*For number lookup (UK number): Send SMS NUMBER to 2020

(Date Reset) UK Time Calendar Day
calendar day (UTC+0)

[Applicable Regions]

48 destinations: Austria, Azores, Belgium, Bulgaria, Canary Islands, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, French Guiana, Germany, Gibraltar, Greece, Guadeloupe, Guernsey, Hungary, Iceland, Ireland, Isle of Man, Italy, Jersey, Latvia, Liechtenstein, Lithuania, Luxembourg, Madeira, Malta, Martinique, Mayotte, Monaco, Netherlands, Norway, Poland, Portugal, Réunion, Romania, Saint Martin, San Marino, Slovakia, Slovenia, Spain, Sweden, Switzerland, United Kingdom, Vatican City

European E8 countries

[European E8 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

French telecommunications operator: Orange

Austrian telecommunications operator: Three

Danish telecommunications operator: Three

Irish telecommunications operator: Three

Italian telecommunications operator: Three

Swedish telecommunications operator: Three

British telecommunications operators: 3

Israeli telecommunications operator: Partner

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Number of days: 24 hours (less than 1 hour is counted as 1 hour)

Reset: 0:00 (UTC+8)

[Applicable Regions] United Kingdom, France, Austria, Denmark, Ireland, Israel, Italy, Sweden

European B31 countries

[European B31 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider:

Austrian telecommunications operators:
Hutchison Drei / T-Mobile

Belgian telecommunications operator: Telenet (BASE) / Orange

Bulgarian telecommunications operator: Yetetl / BTC Vivacom

Croatian telecommunications operator: Telemach / A1

Cypriot telecommunications operators: CYTA / Epic

Czech Republic telecommunications operators: Vodafone / O2

Danish telecommunications operator: Telenor / Telia

Estonian telecommunications operators: Telia / Tele2

Finnish telecommunications operator: DNA / Telia

French telecommunications operators: Bouygues / Free Mobile

German telecommunications operator: Vodafone / O2

Greek telecommunications operators: Vodafone / Wind

Hungarian telecommunications operators: Yettel/Vodafone

Icelandic telecommunications operator: Nova / Siminn

Irish telecommunications operator: Three Ireland

Italian telecommunications operators: iliad(Free)/Wind

Latvian telecommunications operators: Tele2 / LMT

Lithuanian telecommunications operators: Tele2 / Telia

Luxembourg telecommunications operator: POST / Orange

Maltese telecommunications operators: Go Mobile / Melita

Norwegian telecommunications operators: Telia (NetCom) / Telenor

Polish telecom operators: Plus / P4

Portuguese telecommunications operator: NOS / Vodafone

Romanian telecommunications operator: RCS / Orange

Slovakian telecommunications operator: Orange / O2

Slovenian telecommunications operator: Mobitel (Telekom) / Telemach

Spanish telecommunications operators: Vodafone / Movistar

Swedish telecommunications operator: Telenor / Telia

British telecommunications operators: EE

Swisscom, a Swiss telecommunications operator

Turkish telecommunications operator: Turkcell

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "internet" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[internet]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Note that the Netherlands is not included.

Number of days: 24 hours (less than 1 hour is counted as 1 hour)

Daily package reset: 0 time zone 0:00 (UTC+0)

[Applicable Regions]

31 destinations: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, United Kingdom, Switzerland, Turkey

Europe A 33 countries

[European A 33 countries]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

5.
Simply follow the on-screen instructions to set it up. The eSIM plan tag is manually set; please ensure the correct tag is enabled and that "Mobile Data" is assigned to the eSIM tag installed this time.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet service provider:

Irish telecommunications operator: eir / Vodafone IE

Estonian telecommunications operator: Tele2 / Telia

Austrian telecommunications operators: A1 / Drei / T-Mobile AT

Bulgarian telecommunications operators: A1 / mtel / vivacom

Belgian telecommunications operators: BASE / Orange / Proximus

Icelandic telecommunications operator: Nova / Síminn

Polish telecom operator: Orange PL / Play / Plus

Danish telecommunications operators: 3DK / TDC / Telenor / Telia

German telecommunications operator: O2 / Vodafone DE

Orange, a telecommunications operator in the French West Indies

Finnish telecommunications operator: DNA / Elisa

Dutch telecommunications operators: KPN / Vodafone NL

Czech Republic telecommunications operators: O2 CZ / Vodafone CZ

Croatian telecommunications operators: A1 / Tele2

Latvian telecommunications operators: LMT / Tele2

Lithuanian telecommunications operator: Telia / Tele2

Liechtenstein telecommunications operator: Orange / Telecom LI

Orange, a telecommunications operator in Reunion Island

Luxembourg telecommunications operator: Orange / POST / Tango

Romanian telecommunications operator: Orange

RO / Telekom RO / Vodafone RO

Maltese telecommunications operator: GO / Vodafone MT

Norwegian telecommunications operator: Telia / Telenor

Portuguese telecom operators: MEO / NOS / Vodafone PT / 5G/4G

Swedish telecommunications operators: 3 SE / Telenor / Telia

Cypriot telecommunications operators: CYTA / MTN / PrimeTel

Slovakian telecommunications operators: Orange SK / O2 SK

Slovenian telecommunications operators: A1 / Telemach / Telekom SI

Spanish telecommunications operators: Movistar / Orange ES / Vodafone ES / Yoigo

Greek telecommunications operators: Cosmote / Vodafone GR / WIND

Hungarian telecommunications operators: Telenor HU / Vodafone HU

Italian telecommunications operators: iliad / TIM / Vodafone IT / WINDTRE

British telecommunications operators: EE / O2 / Three / Vodafone UK

Gibraltar telecommunications operator: Gibtel

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "Wbdata" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "【Wbdata】" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Note that France is not included.

Number of days: 24 hours (less than 1 hour is counted as 1 hour)

Reset: Time zone and calendar days of the country where the package was activated

[Applicable Regions]

33 destinations: Croatia, Slovenia, Cyprus, Ireland, Liechtenstein, Malta, Denmark, Italy, Sweden, Austria, Belgium, Bulgaria, Czech Republic, Estonia, Finland, French West Indies, Germany, Gibraltar, Greece, Hungary, Iceland, Latvia, Lithuania, Luxembourg, Netherlands, Norway, Poland, Portugal, Réunion Island, Romania, Slovakia, Spain, United Kingdom

Global, 365 days, 15GB

[Global, 365 days, 15GB]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select Internet service provider: Automatic detection

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (Enter "Plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[Plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

[Applicable Regions]

Ireland, Estonia, Austria, Bulgaria, Belgium, Iceland, Poland, Pakistan, Denmark, Germany, France, Finland, Netherlands, Croatia, Latvia, Lithuania, Romania, Malta, USA, Norway, Portugal, Sweden, Switzerland, Cyprus, Turkey, Ukraine, Spain, Greece, Israel, Italy, United Kingdom, Montenegro, New Zealand, Tunisia, Kuwait, Sri Lanka, India, Georgia, Faroe Islands, Algeria, Australia, French Réunion, Qatar, Brazil, Bahrain, Russia, Bosnia and Herzegovina, Ghana, Bangladesh, Gibraltar, Canada, Egypt, French Guiana, United Arab Emirates, Iraq, Saudi Arabia Berkeley, Isle of Man, Guernsey, Jersey, Morocco, Nepal, Nigeria, Bosnia and Herzegovina, Tanzania, Madagascar, Kenya, Gabon, Mexico, Guadeloupe, El Salvador, Argentina, Netherlands Antilles, Cayman Islands, Montserrat, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Barbados, Anguilla, Antigua and Barbuda, Turks and Caicos Islands, British Virgin Islands, Dominica, Grenada, Jamaica, Colombia, Benin, Panama, Uruguay, South Africa, Hong Kong, Macau, Mainland China, Taiwan, Malaysia, Thailand, Philippines, Singapore, Indonesia, South Korea, New Zealand, Australia, Japan, Cambodia

AIS SIM2FLY 399

【AIS SIM2FLY 399】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select Internet service provider: Automatic detection

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "internet" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[internet]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

【Precautions】

*Check traffic:*111*6#

*You must scan the QR code to activate it within 180 days after redeeming it (scan to activate immediately).

*Unlimited data for 8 days within the coverage area; speed will be reduced to 128kbps after exceeding the 6GB high-speed data limit.

(Date Reset): Thai Time (Day of the Month)
Thailand time (UTC+7)

[Applicable Regions]

Oman, Australia, Macau, Pakistan, Palestine, Bahrain, Bhutan, Philippines, Georgia, Guam, Kazakhstan, South Korea, Qatar, Kuwait, Laos, Malaysia, Mongolia, Bangladesh, Nepal, Japan, Sri Lanka, Taiwan, Brunei, Uzbekistan, Hong Kong, Singapore, Israel, India, Indonesia, Jordan, Vietnam, China

Asia-Pacific Region A

[Asia-Pacific Region A]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8.
Choose your internet service provider:

Japanese telecommunications operators: Rakuten, Softbank, Docomo

South Korean telecommunications operators: SK Telecom, LG

Singaporean telecommunications operators: Simba, Starhub

Malaysian telecommunications operators: Digi, Celcom, U Mobile

Thai telecommunications operators: AIS, TrueMove

Indonesian telecom operators: Telkomsel, XL (4G)

Philippine telecommunications operator: Globe

Vietnamese telecommunications operators:
Vietnamobile, Vinaphone

Cambodian telecommunications operator: Metfone

Telstra, an Australian telecommunications operator

New Zealand telecommunications operator: Spark

Telecommunications operators in mainland China: China Mobile, China Unicom, China
Telecom (4G)

Hong Kong telecommunications operators: 3

Macau telecommunications operators: 3

Taiwanese telecommunications operator: Chunghwa

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*Not open to sales channels in Mainland China, Hong Kong, Macau, and Taiwan

Number of days: 24 hours (less than 1 hour is counted as 1 hour)

Reset: 0:00 (UTC+8)

[Applicable Regions]

Japan, South Korea, Singapore, Malaysia, Thailand, Indonesia, Philippines, Vietnam, Cambodia, Australia, New Zealand, Mainland China, Hong Kong, Macau, Taiwan

Asia-Pacific Region B

[Asia-Pacific Region B]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Japanese telecommunications operators: Rakuten / Softbank / Docomo

South Korean telecommunications operators: SK Telecom/LG

Singaporean telecommunications operator: Simba / Starhub

Malaysian telecommunications operators: Digi / Celcom / U Mobile

Thai telecommunications operators: AIS / True Move

Indonesian telecommunications operator: Telkomsel / XL

Philippine telecommunications operator: Globe

Vietnamese telecommunications operators: Vietnamobile / Vinaphone

Cambodian telecommunications operator: Metfone

Telstra, an Australian telecommunications operator

New Zealand telecommunications operator: Spark

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Number of days: 24 hours (less than 1 hour is counted as 1 hour)

Reset: 0:00 (UTC+8)

[Applicable Regions]

Japan, South Korea, Singapore, Malaysia, Indonesia, Thailand, Philippines, Vietnam, Cambodia, Australia, New Zealand

Oman

【Oman】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an internet telecommunications provider: Oman

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN (Enter "Plus") / Username and password should be left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[Plus]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

Date reset: 24 hours (less than 1 hour is counted as 1 hour)

Traffic reset: 0 timezone 0:00 (UTC+0)

[Applicable Region] Oman

Laos

【Laos】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an Internet service provider: Unitel

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "unitel3g" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "【unitel3g】" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

【Precautions】

Includes 10GB of data for 5 days in the covered area, plus 10 minutes of local calls, free incoming calls, and free SMS messages.

Check traffic: *122#

To check the number: *110#

Chinese customer service
Mandarin: Dial 109, then press 5, then press 0 / Dial 109, then press
5, press 0

*You must scan and activate the QR code within 30 days of redeeming it.

*After arriving at your destination, dial 121 to activate the package. After listening to the 10-second voice message, press 1 to activate, and then hang up.

Number of days: 24 hours

【Applicable Region】Laos

Lebara ES, 10 EUR

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8.
Select your internet service provider: Automatic

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "internet" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[internet]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*27-day coverage with 12GB of data (60GB available in Spain), including 500 minutes of EU calls.

*Activation will begin immediately after redeeming the QR code.

*Search number: *123*1*1#

*Check traffic: *123*1*3#

(Date Reset): Spanish Time (Lunar Day)
time / (UTC+2)

[Applicable Regions]

Spain, Germany, Austria, Belgium, Bulgaria, Cyprus, Croatia, Denmark, Slovakia, Slovenia, Estonia, Finland, France, Gibraltar, Greece, Guadeloupe, French Guiana, Netherlands, Hungary, Ireland, Martinique, Réunion, Iceland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Norway, Poland, Portugal (including Madeira and the Azores), Czech Republic, Romania, Sweden, Vatican City

Spain, Germany, Austria, Belgium,
Bulgaria, Cyprus, Croatia, Denmark, Slovakia, Slovenia, Estonia, Finland,
France, Gibraltar, Greece, Guadeloupe, French Guiana, Netherlands, Hungary,
Ireland, Martinique, Réunion, Iceland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Norway, Poland, Portugal
(including Madeira and the Azores), Czech Republic, Romania, Sweden, Vatican
City

CTE (China + UK)

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select Internet service provider: Automatic detection

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "everywhere" / leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "everywhere" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*30 days + 22GB data for Mainland China and the UK, 5GB EU roaming data, 500 minutes of local calls in the UK

*30 days + 50GB data for Mainland China and the UK, 8GB EU roaming data, 2000 minutes of local calls in the UK, and unlimited international calls from the UK (China, Hong Kong, Macau, Taiwan, Japan, South Korea, Australia, USA, Canada, India, Singapore, Malaysia, Thailand, Pakistan, Bangladesh)

*30-day package including 120GB of data for Mainland China and the UK, 12GB of EU roaming data, unlimited local calls within the UK, and unlimited international calls within the UK (China, Hong Kong, Macau, Taiwan, Japan, South Korea, Australia, USA, Canada, India, Singapore, Malaysia, Thailand, Pakistan, Bangladesh).

*Activation is required outside of Mainland China and Hong Kong (scan the QR code to activate immediately).

*You must scan the QR code to activate it within 30 days of redeeming it.

*Check data usage/balance: In the UK, text BAL to 888

Number of days: 24 hours

[Applicable Regions]

Mainland China, United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Hungary, Iceland, Isle of Man, Italy, Jersey, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of Ireland, Romania, San Marino, Slovakia, Slovenia, Spain, Sweden

Maldives

【Maldives】

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Choosing an Internet service provider: Dhiraagu

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "internet.dhimobile" / Leave the username and password blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

4️⃣ Access Point Name "APN" → The plan will generally automatically connect to the corresponding APN → If you need to manually add an APN → Click the "+" in the upper right corner, enter "[internet.dhimobile]" in the Name and APN fields, then save and select.

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

*10-day coverage with 20GB of data, 150 minutes of local calls + 150 local SMS messages + $6.50 USD in credit (direct calls worldwide, approximately $0.2-$0.4 USD/minute in most areas). Activate by dialing 123 in the Maldives.

*Check your data usage: Send the text message "myusage" to 727.

*Check number: *2#

*You must scan and activate the QR code within 30 days of redeeming it.

(Traffic reset) 00:00 (UTC +0)/

(Date Reset) 00:00 (UTC +0)

[Applicable Region] Maldives

Japanese and Korean use

[Suitable for both Japanese and Korean audiences]

⏰Activation Time: Scanning the QR code counts as the first day of use (days are counted consecutively). Please install on the day of departure to avoid accidental activation.

⚠️Make sure you are connected to Wi-Fi or another network first, and that your phone is connected to the internet before starting the setup process.

⚠️It is recommended to delete the eSIM after use to avoid activating it under the wrong tag or due to too many tags causing it to fail to activate.

🍎【eSIM iPhone Brand Installation Steps】

✅ Scan to join:

1. Make sure your phone is connected to Wi-Fi or another network before starting the setup process.

2. On the "Settings" page, select "Mobile Services".

3. Select "Join eSIM" ➡️ Use mobile barcode

4. Once the scanning screen appears, you can scan the eSIM-QR code.

6. Please ensure your Taiwan mobile number is turned off upon arrival and activation.

7. Both "Mobile Data" and "Roaming" must be enabled.

8. Select network

Japanese telecommunications operators: Rakuten, Softbank

South Korean telecommunications operators: LG, SKT

On an iOS iPhone, go to Settings > Mobile Services > Mobile Data > APN and enter "mobile.three.com.hk" / Username and password are left blank.

📱【eSIM Android Brand Installation Steps】:

1️⃣ Settings → Network & Internet → Tap "+" → Download new eSIM → Select Download → Scan QR Code or enter manually

2️⃣ Before arriving at your destination → turn off eSIM to avoid similar signals triggering activation.

3️⃣ Upon arrival at your destination → Select eSIM → Activate eSIM card → Enable mobile data and data roaming

⚠️ If you have already installed eSIM in Taiwan, please turn off the plan after activation.

[Notification]

(Traffic reset) 00:00 Taiwan (UTC +8) /

(Date Reset) 00:00 Taiwan (UTC +8)

【Applicable Regions】Japan, South Korea

국가/지역

언어

Virtual eSIM [APN Lookup]

Complete eSIM APN Setup Tutorial

Advantages of eSIM

When do I need to configure the eSIM APN?

eSIM APN Setup Steps

iOS (iPhone) setup instructions:

Android setup method:

Common eSIM APN settings

eSIM Enablement Checklist

Frequently Asked Questions (FAQ)

Q: Can eSIM and physical SIM cards be used simultaneously?

Q: Does eSIM require data roaming to be enabled?

Q: Why does my eSIM show "No Service"?

Q: Can I uninstall and reinstall eSIM?

Q: Is an eSIM better than a physical SIM card?

Need assistance?

Experience the convenience of eSIM now!

Virtual eSIM Card Setup Tutorial

APN lookup

Japan SanTelecom

Japanese Original Solution IIJ

Japanese native solution Softbank

Japan KDDI

South Korea

Mainland China

Hong Kong and Macau

China, Hong Kong and Macao

Mongolia

Singapore and Malaysia

New Indonesia

Singapore, Malaysia, Indonesia, and Thailand

DTAC Thailand Happy Tourist 219

DTAC Thailand Happy Tourist DTAC

Thailand (10Mbps unlimited)

Cambodia

Vietnam

Vietnam, 5GB

Vietnam, 7GB

Vietnam Mobifone

the Philippines

Australia

Australia - Vodafone, call charges

Australia and New Zealand

Plus New Zealand and Australia

Taiwan

UAE

India

Morocco, 30 days, 10GB

AT&amp;T in the United States

American Dual Telecom A

US, Canada and Mexico

North America A

South America A

BICS Europe

Orange native SIM card for European calling

UK, Unlimited

Türkiye

Africa A

Saudi Arabia

Sri Lanka

축소 가능한 콘텐츠

Bengal

CMI Global Multi-Region

Multiple Asian regions and 11 countries

Multiple regions A 25 countries

Multiple regions F 45 countries

G49 countries in multiple regions

Multiple regions H 66 countries

Multiregional I 77 countries

J115 countries in multiple regions

Multi-region TT 13 countries

TRUE-Travel Asia 399

TRUE-Travel World899

O2 EU, 30 days, 35GB

European E8 countries

European B31 countries

Europe A 33 countries

Global, 365 days, 15GB

AT&T in the United States